Board type furniture with novel styles, bright colors, wood clear and not deformation, not cracking, moth-proofing, moderate price advantages has become a new group in the furniture category.

Right panel furniture of choose and buy should pay attention to the following five:

One, the surface quality of panel furniture in particieboard, medium density fiberboard (MDF) and other man-made board base material, surface decorated with melamine, PVC and paper, wood two sub-companies named seaport wood such as filming, imitation wood grain shape of decorative pattern clear natural, smooth level off, have a good visual effect and handsFeeling.When the choose and buy depends mostly on the surface of the plate if there is a scratch, indentation, bubbling, degumming defects such as peeling and glue marks;Grain pattern is natural, do not have the feeling of artificial artificial;For symmetric furniture, more attention should be paid to the plate the consistency of color, texture and gender, let a person feel symmetric plate as from a piece of material.

Second, the production quality of board type furniture is forming in the production plate after cutting saws, decorative combination sealing side, parts assembled.Its quality is mainly see saw cutting quality, edge, surface decoration quality and port panel quality.Make the plank of board type furniture in the cutting saw plate partsStraightness, vertical degree, to the Angle have quality requirements, in general plate cutting saw technology within 0.01 mm per metre, meet the precision requirements of plate cutting saw behind profile level off, good to Angle, made after the furniture will not appear the phenomenon of plate tilt.Cutting saw blades of precision can also affect the quality of plate end and side edge, scratches, collapse collapse edge, Angle cutting saws defects may also affect the appearance quality of board type furniture.Edge, the surface decoration depends mostly on the decorative components coating is uniform, bonding is strong, trimming whether level off is smooth, parts under the side plate, door plank, the drawer panel mouth whether visible parts of the end face sealing side processing, such as loadingAct the role of the excellent plate edge profile couldn't touch the traces of adhesive.Combined basically see the hole Tongue-and-groove is delicate, neat, fittings installed whether firm, plane and end face have tee joint clearance after connection, with the hand push have loose phenomenon.Door, whether the points of the drawer seam gap is too big, general requirements between 1 mm ~ 2 mm, open doors and drawer, push-pull is flexible, etc.

Three, metal parts, plastic parts quality office furniture, panel furniture are made of metal parts and plastic parts as tighten fittings, so the quality of the metal parts also determines the internal quality board type furniture, furniture.Metal parts require dexterity, smooth, good surface plating treatment, there can be no rust, burr, etc., with a higher accuracy requirement.Plastic parts to modelling beautiful, bright colors, use the on site must have the strength and elastic degree, cannot too thin.Open the connector requires flexible rotation, the spring loaded to loosen the appropriate, such furniture in the open to use can smoothly and easily, without friction.

Four, the size of the main board type furniture on the market at present are mainly composed of complete sets of bedroom furniture and office furniture.In addition, a multi-functional film electrical cabinets and other products.Function of its furniture main dimensions (size)Standards are required.Such as wardrobe space depth within the specified hang chest should be greater than or equal to 530 mm, hang on long dress clothes stick down to the floor surface spacing should be greater than or equal to 1400 mm, the table class furniture height is 680 mm - 760 mm, the writing desk in the middle of the drawer down along the height to the middle of the clear height should be greater than or equal to 580 mm, bookcase high clearance between the layers should be greater than or equal to 520 mm.The main dimensions above, when the choose and buy should pay attention to, because the furniture if less than the specified size, use will bring inconvenience, affect the use of the furniture.Such as wardrobe, spatial depth starts to hang the garmentDoor closed not classy phenomenon. 5, formaldehyde release a quantity to board type furniture general base material for particleboard and medium density fiberboard (MDF).The board has the formaldehyde release a quantity to the national standard.With particle board provision of formaldehyde release a quantity to each hectogram less than or equal to 50 mg, medium density fiberboard (MDF) formaldehyde release a quantity to each hectogram less than or equal to 40 mm.Formaldehyde is also called formalin, is a kind of have a certain influence to human body health harmful toxic substances.If the consumer is when the choose and buy, opened the door and drawer, there is a strong stimulus can smell to smell, cause the eyes or cause cough, then furniture formaldehyde release a quantity to exceed the standard requiredAnd should not be this kind of furniture of choose and buy.